Flat roof contractors in Bronx

Flat roofs are very common, but the place where you live would define which materials to be used. These types of roofs are suitable in hot environments where rainfall is much less frequent. Flat roofing is usually made up of brickwork or cement which helps in hot temperatures. It is low-cost and easier to use when a wooden material is not within reach.

On the flip side, in situations where the roof may turn out to be overburdened by rainfall and seepage, or where water sopping brickwork might lead to frost and result in breaking up of cement, stonework, concrete through expansion, these types of roofs couldn’t perform the duty well. Let’s have a look-see over the types of flat roofing.

Types of Flat Roofs

When it comes to talk about the durability of flat roofs, they generally have warranty span of 12 to 20 years depending upon the material used. But when flat roofing is genuinely, subject of concern, General and Roofing Contractor Bronx proves to be the perfect choice. With proficient installation, a roof can have life span of more than two decades.

EPDM Rubber Roof

Ethylene Propylene Diene Monomer is a rubber that looks like a good inner pipe but produced to avoid harm sunlight. EPDM can be mechanically fixed with nails, applied along with stone or even glued. It can be easily installed as its material is relatively light yet tremendously resistant to scratches, cuts, and holes. It is also very simple to patch seepages.

Be that as it may, the standard dark material enthrals heat and light coverings which, in hot temperatures, can add thirty percent to the cost and more at risk to punctures than the other types.

Build-Up Roof

This hot-tar and stony roof is built from layers of impermeable material spread out with very hot-tar. Talking about the materials, this type of roof uses membranes of fibreglass etc. Build-Up roofs are fire resistant and look outstanding with windows and decks, adding to overall roofing style. But this roof type is very heavyweight so often beams are required to be very strong.

Modified Bitumen Roof

This is a single-ply pleated roof flooded with a mineral-based wear surface area. Modified bitumen roofs can be installed with the common torch method, asphalts or cold adhesives. Modified Bitumen roof reflects the temperature and slashes energy bills but the torch-down application method is risky and can cause a fire therefore not recommended for covered structures.